Electric nail drill
Amber D'Halluin
1. What is an electric nail file?
An electric file is a handy tool for nail technicians to speed up and simplify manicures and pedicures. A nail drill can be used to prepare the nail plate, push back and remove cuticles, and remove artificial nails. While it's a useful tool, it's important to remember that using an electric file on the natural nail plate is not recommended for anyone without the proper skills and training. Uncontrolled use can result in filing away too much nail and can cause potential injury. As a nail technician, you must have the proper training and certification to use a nail drill. Client safety is paramount, and it's important to use this tool with the necessary knowledge and skills.
2. Why use a nail drill?
If you're looking to save time during a manicure, investing in a nail drill is definitely worth it. A professional nail drill is a must-have for any nail salon. With the skill to use this device, you can easily prepare your nails, trim or remove artificial nails, and even perform pedicures. A major advantage of using a nail drill is that it puts much less strain on your wrists compared to filing with a regular file. This is because you need to apply less force while filing.
3. How should you work safely with a nail drill?
If you want to work as a nail technician with a nail drill, it's essential to first complete training and obtain a certificate. Knowledge, practice, and skill are crucial, especially for the safety of your clients. When using an electric nail file, it's essential to proceed with caution. If you're not careful, you could accidentally damage the nail matrix or file the nails too finely. Once the matrix is damaged, this can lead to serious nail damage, which in some cases can even be permanent. Therefore, it's crucial that you, as a nail technician, are fully aware of the risks associated with using a nail drill and that you take the necessary precautions to minimize them.
4. What to pay attention to when milling?
When using a nail drill, it's crucial not to damage the natural nail plate and matrix. To prevent this, be careful not to file too deeply under the eponychium . Filing too deeply can damage the nail matrix, which can lead to permanent damage.
If you're unfamiliar with filing the natural nail plate with a nail drill, it's not recommended. However, if you do want to do it, it's recommended to use a 180 degree file and not to apply too much pressure while filing, so you don't remove too many layers of the natural nail plate.
5. Advantages and disadvantages of milling
A nail drill, like any other device, has its pros and cons. One advantage of a nail drill is that it saves time in a nail salon. Filing is much faster and more precise than with a regular file. It also requires less effort, putting less strain on your wrists.
However, there are also disadvantages to using a nail drill. For example, heat can build up if you apply too much force while drilling. A lot of dust is also generated, but this can be avoided by using an exhaust system . Furthermore, using a nail drill can be dangerous if you don't have the right skills; it can damage the nail matrix, potentially leading to permanent damage. Therefore, it's important to proceed carefully and professionally when using a nail drill.
6. What should you pay attention to when purchasing a milling machine?
When looking for an electric nail file, there are several important factors to consider. The power of the file is crucial and must be suitable for the intended use. If you'll only be using the file sporadically at home, we recommend a 35W model. However, if you're using the electric nail file professionally, a power rating between 40W and 45W is recommended. Speed is also an important consideration. Therefore, choose a model with adjustable speed. A maximum of 30,000 revolutions per minute is ideal.
An electric file should also fit comfortably in your hand. Therefore, choose a model with a handle that fits your hand well and a twist-lock function for quick bit changes. It's also helpful if you can adjust the rotation direction of the handpiece and if the machine is equipped with a foot pedal. This allows you to operate the milling machine with your feet instead of having to constantly turn it on and off with a button.
7. Maintaining your milling machine
It's crucial to thoroughly clean your milling machine after each use. This demonstrates hygienic practices, which is crucial for customer confidence. It's recommended to first remove all dust with a nail brush. This will remove most of the dust, and you're ready to clean your milling machine further. Then, use a damp cloth to clean the entire milling machine. When disinfecting your milling machine, be careful not to get any disinfectant inside, as this could damage and destroy the machine.
8. The various milling machines in our range
If you're looking for a nail drill, the selection can sometimes be overwhelming. At Mistero Milano, you have three different drills to choose from: the Mighty, the Champion, and the K-35. But which one should you choose? Below, we'll delve deeper into the features of each machine so you can make the right choice.
The Saeyang Mighty is our entry-level model. It's comparable to the Champion, making it just as durable as other models. The Mighty's handpiece is lighter and slightly less powerful than the Champion's. It features a foot pedal and a twist-lock handle and is suitable for both manicures and pedicures. It has almost no vibration, making it almost completely silent. This electric drill is suitable for both left- and right-handed users. The handpiece can be operated with a manual button on the device or the foot pedal. The Mighty has an electrical output of 45W and a speed of up to 30,000 revolutions per minute. The device weighs 1.26 kg and measures 11.5 x 15.5 x 9 cm (width x length x height). The handpiece is compatible with all standard bits with a diameter of 2.34 mm.
8.2 Nail mill Saeyang Marathon 3 Champion Model 2025
The Saeyang Marathon 3 – Champion is a well-known and new model in the nail industry and is used by both professionals and beginners (an upgrade from the Marathon 3 Champion model). It has similar specifications to the Mighty. The device features a foot pedal and a twist-lock handle and is suitable for both manicures and pedicures. It has almost no vibration, making it almost completely silent. The electric drill is suitable for both left- and right-handed users. The handpiece can be operated with a manual button on the device or the foot pedal. The Champion has an electric power of 45W and a speed of up to 30,000 revolutions per minute. The device weighs 1.15 kg and has dimensions of 11.6 x 15.9 x 8.4 cm (width x length x height). The handpiece is compatible with all standard bits with a diameter of 2.34 mm.
The Saeyang Marathon 3 – Champion is a well-known model in the nail industry and is used by both professionals and beginners. It has similar specifications to the Mighty. The device features a foot pedal and a twist-lock handle and is suitable for both manicures and pedicures. It has almost no vibration, making it almost completely silent. The electric drill is suitable for both left- and right-handed users. The handpiece can be operated with a manual button on the device or the foot pedal. The Champion has an electrical output of 45W and a speed of up to 30,000 revolutions per minute. The device weighs 1.23 kg and has dimensions of 11.5 x 15.5 x 7.5 cm (width x length x height). The handpiece is compatible with all standard bits with a diameter of 2.34 mm.
The Saeyang K-35 is the most powerful milling machine in the range and has a beautiful rose gold color. The handpiece is powerful and sturdy, with minimal vibration to reduce wrist strain, making it comfortable to hold. The machine features a foot pedal and a twist-lock handle and is suitable for both manicures and pedicures. It produces almost no vibration, making it almost completely silent. The K-35 has overload protection to prevent the machine from overheating. This electric milling machine is suitable for both left- and right-handed users. The handpiece can be operated with a manual button on the machine or the foot pedal. The K-35 has an electrical output of 40W and a maximum speed of 30,000 revolutions per minute. The machine has a digital display, weighs 1.13 kg, and measures 11.5 x 11.5 x 7.5 cm (width x length x height). The handpiece is suitable for all standard bits with a diameter of 2.34 mm.
